When a heating and cooling system malfunctions: There may be several reasons leading to the non-functioning of these systems, the primary one may result from the disturbance in any one of these components: distribution system, heat/cold source, and thermostat. You can also look for the heating and cooling via https://toshiba-aircon.com.au/air-conditioning-systems/heating-and-cooling/.
At the very beginning of starting the process of maintenance always ensure that whether the unit is receiving the required power or not. The power areas are not always located at the same positions on each and every system. Some may have it situated on the body itself whereas others may have a separate panel exclusively designed for the power switch. If the unit is having a separate power switch always ensure that the same must be switched on before checking whether the system is receiving power or not.
The next vital step includes checking whether the thermostat is set at the proper condition. In this regard, one may perform various tasks from their own end towards changing the settings of the same. For example, you may raise or lower the settings by 5 degrees pertaining to the specifications of the system.
If the combustion fuel is gas or oil, always ensure that the adequate and sufficient supply of the same to the unit prior to working to maintain it. If the unit supports a reset button then always wait for half an hour for the motor to cool down and then switch on the button. Even after this, the system does not start up, repeat the entire procedure for a few times to get a positive result.